医疗器械 材料 植入物
| 原材料 | ASTM D256 | Standard Test Methods for Determining the Izod Pendulum Impact Resistance of Plastics确定塑料悬臂梁抗冲击性的标准测试方法 |
| 原材料 | ASTM D638 | Standard Test Method for Tensile Properties of Plastics拉伸性能的标准测试方法 |
| 原材料 | ASTM F1044 | Standard Test Method for Shear Testing of Calcium Phosphate Coatings and Metallic Coatings手术植入物的涂层—第12部分：磷酸钙涂层和金属涂层的剪切测试方法 |
| 原材料 | YY/T 0988.12 | Coatings of surgical implants—Part 12: Shear testing method of calcium phosphate coating and metallic coatings手术植入物的涂层—第12部分：磷酸钙涂层和金属涂层的剪切测试方法 |
| 原材料 | ASTM F1147 | Standard Test Method for Tension Testing of Calcium Phosphate and Metallic Coatings磷酸钙和金属涂层张力测试的标准测试方法 |
| 原材料 | YY/T 0988.11 | Coatings of surgical implants—Part 11: Tension testing method of calcium phosphate coating and metallic coatings外科植入物的涂层—第11部分：磷酸钙涂层和金属涂层的张力测试方法 |
| 原材料 | ASTM F1160 | Standard Test Method for Shear and Bending Fatigue Testing of Calcium Phosphate and Metallic Medical and Composite Calcium Phosphate/Metallic Coatings磷酸钙和金属医用和复合磷酸钙/金属涂层剪切和弯曲疲劳测试的标准测试方法 |
| 原材料 | YY/T 0988.13 | Coatings of surgical implants—Part 13: Test method for shear and bending fatigue testing of calcium phosphate and metallic and calcium phosphate/metallic coating外科植入物涂层—第13部分：磷酸钙和金属和磷酸钙/金属涂层的剪切和弯曲疲劳测试的测试方法 |
| 原材料 | ASTM F1854 | Standard Test Method for Stereological Evaluation of Porous Coatings on Medical Implants用于对医用植入物上的多孔涂层进行立体学评估的标准测试方法 |
| 原材料 | GB/T 10610 | Geometrical Product Specifications (GPS)— Surface texture: Profile method— Rules and procedures for the assessment of surface texture几何产品规格 （GPS）— 表面纹理：剖面方法— 表面纹理评估规则和程序 |
| 原材料 | ISO 4287 | Geometrical Product Specifications (GPS) — Surface texture Profile method — Terms, definitions and surface texture parameters几何产品规格 （GPS） — 表面纹理轮廓方法 — 术语、定义和表面纹理参数 |
| 原材料 | ISO 4288 | Geometrical Product Specifications (GPS) — Surface texture: Profile method — Rules and procedures for the assessment of surface texture几何产品规格 （GPS） — 表面纹理：轮廓方法 — 评估表面纹理的规则和程序 |
| 原材料 | YY/T 0988.14 | Coatings of surgical implants—Part 14: Stereological evaluation method of porous coatings外科植入物的涂层—第14部分：多孔涂层的立体评估方法 |
| 原材料 | ASTM F1978 | Standard Test Method for Measuring Abrasion Resistance of Metallic Thermal Spray Coatings by Using the Taber Abraser使用泰伯磨具测量金属热喷涂涂层耐磨性的标准测试方法 |
| 原材料 | YY/T 0988.15 | Coatings of surgical implants—Part 15: Test method for abrasion resistance testing of metallic thermal spray coatings外科植入物的涂层—第15部分：金属热喷涂涂层耐磨性测试的测试方法 |
| 原材料 | ASTM F2003 | Standard Practice for Accelerated Aging of Ultra-High Molecular Weight Polyethylene after Gamma Irradiation in Air空气中伽马辐照后超高分子量聚乙烯加速老化的标准实践 |
| 原材料 | ASTM F648 | Standard Specification for Ultra-High-Molecular-Weight Polyethylene Powder and Fabricated Form for Surgical Implants超高分子量聚乙烯粉末和外科植入物制造形式的标准规格 |
| 原材料 | ISO 527-1 | Plastics — Determination of tensile properties — Part 1: General principles塑料 — 拉伸性能的测定 — 第 1 部分：一般原则 |
| 原材料 | GB/T 1040.1 | Plastics—Determination of tensile properties— Part 1: General principles塑料—拉伸性能的测定—第1部分：一般原理 |
| 原材料 | ISO 22214 | Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for cyclic bending fatigue of monolithic ceramics at room temperature精细陶瓷（先进陶瓷、先进技术陶瓷）—常温下单片陶瓷循环弯曲疲劳试验方法 |
| 原材料 | ISO 23146 | Fine ceramics (advanced ceramics, advanced technical ceramics) — Test methods for fracture toughness of monolithic ceramics — Single-edge V-notch beam (SEVNB) method精细陶瓷（先进陶瓷、先进技术陶瓷）— 单片陶瓷断裂韧性试验方法 — 单边V型槽梁（SEVNB）法 |
| 原材料 | ISO 5834-3 | Implants for surgery — Ultra-high-molecular-weight polyethylene — Part 3: Accelerated ageing methods手术植入物 — 超高分子量聚乙烯 — 第 3 部分：加速老化方法 |
| 原材料 | YY/T 0772.3 | Implants for surgery Ultra-high-molecular-weight polyethylene Part 3: Accelerated ageing methods 手术植入物 超高分子量聚乙烯第3部分：加速老化方法 |
| 原材料 | YY/T 1430 | Standard test method for small punch testing of ultra-high molecular weight polyethylene used in surgical implants用于外科植入物的超高分子量聚乙烯小冲头测试的标准测试方法 |
| 原材料 | ISO 16429 | Implants for surgery — Measurements of open-circuit potential to assess corrosion behaviour of metallic implantable materials and medical devices over extended time periods手术植入物 — 测量开路电位，以评估金属植入材料和医疗设备在较长时间内的腐蚀行为 |
| 原材料 | YY/T 1552 | Implants for surgery—Measurements of open-circuit potential to assess corrosion behaviour of metallic implantable materials and medical devices over extended time periods手术植入物—测量开路电位，以评估金属植入材料和医疗设备在较长时间内的腐蚀行为 |
| 原材料 | GB/T 23101.4 | Implants for surgery—Hydroxyapatite—Part 4: Determination of coating adhesion strength手术植入物—羟基磷灰石—第4部分：涂层粘合强度的测定 |
| 原材料 | ISO 13779-4 | Implants for surgery — Hydroxyapatite — Part 4: Determination of coating adhesion strength手术植入物 — 羟基磷灰石 — 第 4 部分：涂层粘合强度的测定 |
| 原材料 | ISO 180 | Plastics — Determination of Izod impact strength塑料 — 悬臂梁冲击强度的测定 |
| 原材料 | GB/T 1843 | Plastics—Determination of izod impact strength塑料—悬臂梁冲击强度的测定 |
| 原材料 | ASTM D256 | Standard Test Methods for Determining the Izod Pendulum Impact Resistance of Plastics确定塑料悬臂梁抗冲击性的标准测试方法 |
| 原材料 | ASTM D638 | Standard Test Method for Tensile Properties of Plastics拉伸性能的标准测试方法 |
| 原材料 | ASTM F1044 | Standard Test Method for Shear Testing of Calcium Phosphate Coatings and Metallic Coatings手术植入物的涂层—第12部分：磷酸钙涂层和金属涂层的剪切测试方法 |
| 原材料 | YY/T 0988.12 | Coatings of surgical implants—Part 12: Shear testing method of calcium phosphate coating and metallic coatings手术植入物的涂层—第12部分：磷酸钙涂层和金属涂层的剪切测试方法 |
| 原材料 | ASTM F1147 | Standard Test Method for Tension Testing of Calcium Phosphate and Metallic Coatings磷酸钙和金属涂层张力测试的标准测试方法 |
| 原材料 | YY/T 0988.11 | Coatings of surgical implants—Part 11: Tension testing method of calcium phosphate coating and metallic coatings外科植入物的涂层—第11部分：磷酸钙涂层和金属涂层的张力测试方法 |
| 原材料 | ASTM F1160 | Standard Test Method for Shear and Bending Fatigue Testing of Calcium Phosphate and Metallic Medical and Composite Calcium Phosphate/Metallic Coatings磷酸钙和金属医用和复合磷酸钙/金属涂层剪切和弯曲疲劳测试的标准测试方法 |
| 原材料 | YY/T 0988.13 | Coatings of surgical implants—Part 13: Test method for shear and bending fatigue testing of calcium phosphate and metallic and calcium phosphate/metallic coating外科植入物涂层—第13部分：磷酸钙和金属和磷酸钙/金属涂层的剪切和弯曲疲劳测试的测试方法 |
| 原材料 | ASTM F1854 | Standard Test Method for Stereological Evaluation of Porous Coatings on Medical Implants用于对医用植入物上的多孔涂层进行立体学评估的标准测试方法 |
| 原材料 | GB/T 10610 | Geometrical Product Specifications (GPS)— Surface texture: Profile method— Rules and procedures for the assessment of surface texture几何产品规格 （GPS）— 表面纹理：剖面方法— 表面纹理评估规则和程序 |
| 原材料 | ISO 4287 | Geometrical Product Specifications (GPS) — Surface texture Profile method — Terms, definitions and surface texture parameters几何产品规格 （GPS） — 表面纹理轮廓方法 — 术语、定义和表面纹理参数 |
| 原材料 | ISO 4288 | Geometrical Product Specifications (GPS) — Surface texture: Profile method — Rules and procedures for the assessment of surface texture几何产品规格 （GPS） — 表面纹理：轮廓方法 — 评估表面纹理的规则和程序 |
| 原材料 | YY/T 0988.14 | Coatings of surgical implants—Part 14: Stereological evaluation method of porous coatings外科植入物的涂层—第14部分：多孔涂层的立体评估方法 |
| 原材料 | ASTM F1978 | Standard Test Method for Measuring Abrasion Resistance of Metallic Thermal Spray Coatings by Using the Taber Abraser使用泰伯磨具测量金属热喷涂涂层耐磨性的标准测试方法 |
| 原材料 | YY/T 0988.15 | Coatings of surgical implants—Part 15: Test method for abrasion resistance testing of metallic thermal spray coatings外科植入物的涂层—第15部分：金属热喷涂涂层耐磨性测试的测试方法 |
| 原材料 | ASTM F2003 | Standard Practice for Accelerated Aging of Ultra-High Molecular Weight Polyethylene after Gamma Irradiation in Air空气中伽马辐照后超高分子量聚乙烯加速老化的标准实践 |
| 原材料 | ASTM F648 | Standard Specification for Ultra-High-Molecular-Weight Polyethylene Powder and Fabricated Form for Surgical Implants超高分子量聚乙烯粉末和外科植入物制造形式的标准规格 |
| 原材料 | ISO 527-1 | Plastics — Determination of tensile properties — Part 1: General principles塑料 — 拉伸性能的测定 — 第 1 部分：一般原则 |
| 原材料 | GB/T 1040.1 | Plastics—Determination of tensile properties— Part 1: General principles塑料—拉伸性能的测定—第1部分：一般原理 |
| 原材料 | ISO 22214 | Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for cyclic bending fatigue of monolithic ceramics at room temperature精细陶瓷（先进陶瓷、先进技术陶瓷）—常温下单片陶瓷循环弯曲疲劳试验方法 |
| 原材料 | ISO 23146 | Fine ceramics (advanced ceramics, advanced technical ceramics) — Test methods for fracture toughness of monolithic ceramics — Single-edge V-notch beam (SEVNB) method精细陶瓷（先进陶瓷、先进技术陶瓷）— 单片陶瓷断裂韧性试验方法 — 单边V型槽梁（SEVNB）法 |
| 原材料 | ISO 5834-3 | Implants for surgery — Ultra-high-molecular-weight polyethylene — Part 3: Accelerated ageing methods手术植入物 — 超高分子量聚乙烯 — 第 3 部分：加速老化方法 |
| 原材料 | YY/T 0772.3 | Implants for surgery Ultra-high-molecular-weight polyethylene Part 3: Accelerated ageing methods 手术植入物 超高分子量聚乙烯第3部分：加速老化方法 |
| 原材料 | YY/T 1430 | Standard test method for small punch testing of ultra-high molecular weight polyethylene used in surgical implants用于外科植入物的超高分子量聚乙烯小冲头测试的标准测试方法 |
| 原材料 | ISO 16429 | Implants for surgery — Measurements of open-circuit potential to assess corrosion behaviour of metallic implantable materials and medical devices over extended time periods手术植入物 — 测量开路电位，以评估金属植入材料和医疗设备在较长时间内的腐蚀行为 |
| 原材料 | YY/T 1552 | Implants for surgery—Measurements of open-circuit potential to assess corrosion behaviour of metallic implantable materials and medical devices over extended time periods手术植入物—测量开路电位，以评估金属植入材料和医疗设备在较长时间内的腐蚀行为 |
| 原材料 | GB/T 23101.4 | Implants for surgery—Hydroxyapatite—Part 4: Determination of coating adhesion strength手术植入物—羟基磷灰石—第4部分：涂层粘合强度的测定 |
| 原材料 | ISO 13779-4 | Implants for surgery — Hydroxyapatite — Part 4: Determination of coating adhesion strength手术植入物 — 羟基磷灰石 — 第 4 部分：涂层粘合强度的测定 |
| 原材料 | ISO 180 | Plastics — Determination of Izod impact strength塑料 — 悬臂梁冲击强度的测定 |
| 原材料 | GB/T 1843 | Plastics—Determination of izod impact strength塑料—悬臂梁冲击强度的测定 |
| 产品名称 | 检测标准 | 检测项目 |
| 原材料 | GB/T 1843 | 塑料—悬臂梁冲击强度的测定 |
好评率：100%
好评数量：0个
工作速度：5分
工作质量：5分
工作态度：5分
暂无评价
联系我
收藏机构
